A few months ago we brought you the news that Dreamconn creator Chris Daioglou had turned his attention to the humble Dreamcast VMU. In a scene not too dissimilar to that bit in that documentary where Steve Rogers is enrolled in the Super Soldier program, Chris has embarked on a full-fledged project to completely upgrade and overhaul Sega's diminutive little handheld-cum-memory card and turn it into a device befitting the 21st century.
Titled VM2, the newly redesigned Dreamcast memory card will boast such features as:
- A new monochrome backlit LCD screen
- Higher screen resolution
- Micro-SD storage
- Internal storage of 128KB (200 blocks)
- Embedded High-capacity battery
- USB-C connection
- Original audio support
- DreamEye support
- The ability to stream LCD game images to a PC
Originally, VM2 looked like it would come in a slightly altered, chunkier bespoke form factor. However, with a little bit of internal jiggery-pokery it appears that Chris has managed to shoehorn all the internal gubbins into an original VMU case. Lovely stuff.
Source: VM2 Indiegogo campaign |
So far, so good then. A new iteration of the VMU to sit alongside your GDEMU-enabled, DCHDMI-capable, Noctua fan-bequeathed Dreamcast console. But what of the price of such a device? Chris initially hinted that the price would come in around the £100 mark...and that's exactly where the newly launched Indiegogo campaign has landed.
It's a hefty sum for a VMU, but for the additional features and sheer novelty value, I'm pretty sure many Dreamcast nuts around the globe will have little issue with the asking price. The predicted delivery date is August 2023 and the flexible goal is currently set at a smidge over £78,000; but time will tell if VM2 hits these targets.
We took a few moments to ask Chris some questions about the VM2 Project, and he kindly supplied us with the answers!
DCJY: Hi Chris - I suppose the burning question is...why choose to update the VMU?
Chris Diaoglou: As a modder, I've been working with VMUs for the past 6 years offering services like the backlit LCD and rechargeable battery. Although the modded VMUs have been very popular across the community, lately I realised that the Dreamcast scene needed something more.
Getting original VMUs, new-in-box, is growing more and more expensive, and finding VMUs in specific colours is getting harder. As a developer, and being a perfectionist, I also wanted something 'cleaner' than simply modifying VMU shells and adding electronics. Finally, as a huge Dreamcast fan, I was aware of the original VMU design flaws, and always wished for them to somehow be corrected.
For all of the above reasons, the possibility of re-making the VMU started to take shape in my mind over the last couple of years. As an outcome, last February I decided to get on with this project and went straight through to designing a new PCB, external shell, and firmware. The result of this was the VM2.
DCJY: What was the reasoning behind starting a crowdfunding campaign?
Chris Diaoglou: Originally, I thought the VM2 was going to be a fairly simple project, that would interest only a few around the globe. When the project info released and the first prototype was shown, it turned out that actually a lot of Dreamcast users were very interested in the project.
Also, the cost for reproducing specific parts - like the external shell (with accurate molding, not cheap 3D printing), or the VMU special connector - was huge and required to be manufactured in large quantities. So, it turned out that for making the VM2 a reality, a crowdfunding campaign was actually a necessity.
Update (17/09/22): After listening to community feedback, Chris is now upgrading the VM2 to use USB-C instead of the initial micro-USB port. He has updated the packing list accordingly, as there is now no need for an additional micro-USB to USB-C adapter to ship with units. He has also updated the campaign page to list the updated specs and design.
***
So there we go. Thanks to Chris for answering our questions and also for heeding the requests of the community to include a USB Type-C adapter. Will you be investing in this next generation reimagining of the humble Dreamcast VMU? Let us know in the comments.
7 comments:
I'll probably get one. It'll be nice to have the bigger storage option for saved games.
I'll probably get one as well. I have a spare 4GB micro-SD card sitting around, which should be overkill for storage.
I'm going to put a 2TB SD card in mine for my Half-Life save.
HA!
Maybe instead of micro USB, use USB-C?...
Updated with info from Chris to say a USB-C adapter will now come with each unit.
@DCGX - glad someone got my (incredibly niche and nerdy) joke! XD
4 pls !
Post a Comment